Remington 870 12 Gauge has been the first choice of sportsman and law enforcement officials for decades. This particular version is the Remington 870 Hardwood Home Defense model sporting the iconic classic look of a hard wood stock and fore end paired with a matte blued receiver and barrel. The smooth cycling pump action is supremely reliable and dependable featuring a cylinder smooth bore barrel and classic single bead sight. The Remington 870 Hardwood Home Defense is the ideal home defense shotgun and is a must own masterpiece. This shotgun will accept standard model 870 replacement barrels without modification. When things go bump in the night, don’t be without your trusty Remington 870 pump action shotgun.
Remington 870 Hardwood Home Defense Pump Action Shotgun 81197
3″ Chamber (Accepts 2-3/4″ and 3″ Shot Shells)
18.5″ Smooth Bore Barrel
6 Round Capacity
Magazine Tube Extension Installed
Fixed Cylinder Choke Constriction Rate
Not Threaded For Chokes
Single Bead Front Sight
Traditional Hardwood Stock
Satin Finish (Wood)
Length of Pull 14″
Drop at Comb 1-1/2″
Drop at Heel 2-1/2″
Overall Length 38.5″
Overall Weight 7.5lbs
Matte Blued (Receiver/Barrel)
Remington 870 12 Gauge History
The Remington 870 was the fourth major design in a series of Remington pump shotguns. John Pedersen designed the fragile Remington Model 10 (and later the improved Remington Model 29). John Browning designed the Remington Model 17 (which was later adapted by Ithaca into the Ithaca 37), which served as the basis for the Remington 31. The Model 31 was marketed as the “ball-bearing repeater” and was well-received, but its many machined and handfitted parts made the gun expensive to manufacture. Consequently, it struggled in sales compared to the Winchester Model 12. To achieve better sales, Remington produced the Model 870 in 1950, which was more modern and reliable in its construction, easy to take apart and maintain, and relatively inexpensive.
The 870 was a commercial success. Remington sold two million guns by 1973 (ten times the number of Model 31 shotguns it replaced). As of 1983, the 870 held the record for the best-selling shotgun in history, with three million sold. By 1996, spurred by sales of the basic “Express” models, which were added as a lower-cost alternative to the original Wingmaster line, sales topped seven million guns. On April 13, 2009, the ten millionth Model 870 was produced.
Remington Design details
The 870 features a bottom-loading, side ejecting receiver and a tubular magazine under the barrel. The gun comes with a plug for migratory bird hunting which reduces the magazine’s capacity to two rounds. It has dual action bars, internal hammer, and a bolt which locks into an extension in the barrel. The action, receiver, fire control group, safety catch and slide release catch of the Remington Model 870 shotgun are similar to those used on the Remington Model 7600 series pump-action centerfire rifles and carbines. The basic fire control group design was first used in the automatic 11–48. Twelve gauge stocks will also interchange on the older 12-gauge-sized 20-gauge receivers, although modification is needed to fit the smaller sized 20-gauge receivers employed since the late 1970s. Several parts of the 870, such as buttstocks and magazine tubes, will interchange with the semi-automatic Remington 1100 and 11–87.
The original 870 models were offered with fixed chokes. In 1986 Remington introduced the new Remington “Rem Choke” system of screw-in chokes (also fitted to Remington model 1100 auto-loading shotguns at the same time). Initially, the Rem Chokes were offered only in 12 gauge in barrel lengths of 21″, 26″, and 28″. The following year the availability was expanded to the 20 gauge and included other barrel lengths.
The 870’s production for over 30 years had a design whereby a user could fail to press a shell all the way into the magazine when loading – so that the shell latch did not engage the shell – which could result in tying up the gun. This was caused by the shell slipping out of the magazine under the bolt in the receiver to bind the action, requiring rough treatment of the action or even disassembly. The potential issue was resolved with the introduction of the “Flexi Tab” carrier. Guns with this modification can be identified by the “U”-shaped cut-out on the carrier, visible from below the gun. The cut-out, combined with a modified machining on the underside of the slide assembly, allows the action to be opened with a shell on the carrier.
BUY 870 express 12 gauge pump
Remington 870 express magnum 12 gauge wood for sale
Remington 870 express magnum 12 gauge specs
Buy Remington in Atlanta
Buy Remington in Georgia
Buy Buy Remington in USA
Remington for sale
cheap remington 870 express 12 gauge 28 inch barrel
What is the difference between a Remington 870 and 870 Express?
There are hundreds of variations of the Remington 870 in 12, 16, 20, 28 gauges and .410 bore. In 1969 Remington introduced 28 gauge and .410 bore models on a new scaled-down receiver size, and in 1972 a 20 gauge Lightweight (“LW”) version was introduced on the same sized receiver, and all of the smaller gauges today are produced on that size receiver. From the original fifteen models offered, Remington currently produces dozens of models for civilian, law enforcement, and military sales. 870 variants can be grouped into:
- Express – Matte blue/black bead-blasted with hardwood, laminated hardwood or synthetic stocks and chambered for 2 3/4″ and 3″ 12 or 20 gauge shot shells. All Expresses have been chambered in 3″ in 12 and 20 gauge, but markings have varied.
- Express Tactical – Matte blue/black bead-blasted with a synthetic stock and chambered for 2 3/4″, 3″, or 3 1/2″ 12 gauge shot shells.
- FieldMaster – Matte blue/black with walnut stock and chambered for 2 3/4″ and 3″ 12 or 20 gauge shot shells.
- Mark 1 – adopted by the United States Marine Corps in the late 1960s and saw service into the 21st century. The Model 870 Mark 1 has a 21-inch (53 cm) barrel with an extended magazine increasing total capacity to 8 rounds, and was fitted with an adapter allowing use of the standard M7 bayonet for the M16 rifle.
- MCS (Modular Combat Shotgun) – A new modular variant of the Model 870 which can be quickly modified with different barrels, magazine tubes, and stocks for different purposes, such as urban combat and door breaching.
- Police Magnum – The law enforcement version of the Model 870, the Police Magnum, is chambered in 12 gauge 3″ magnum. It can be ordered with two options: a blued or Parkerized steel finish. These models feature a sturdier sear spring, carrier latch spring, and a forged steel extractor (as opposed to the metal injection molded extractor used on the 870 Express variants). The receivers are stamped with the insignia “Remington 870 Police Magnum” beginning 2014. They are equipped with Police Magnum-specific walnut hardwood or polymer stocks which are fitted with sling mounts. The walnut stocks omit the checkering that is present on the Express/Wingmaster variants. 870 Police Magnum models come with matching walnut or polymer pumps that are decreased in length to prevent interference with most vehicle-mounted rack systems. The shortened pump also allows quick visual inspection of the internal magazine regardless of what position the pump is in, whereas the optional lengthened sport-type pump on other models partially blocks the loading port when it is pulled to the rear position. Police Magnum models are available with 18″ or 20″ barrels, with or without iron rifle sights, and have a standard magazine tube capacity of four rounds. They can be ordered with a two or three round extended magazine tube from the factory, bringing total capacity to 7 (+1) shotshells (18″ barrel) or 8 (+1) shotshells (20″ barrel). All Police Magnum barrels come with an improved cylinder choke unless specially ordered to fit the user’s needs.